Home 9 Product 9 Holo Audio Cyan 2 DAC

Holo Audio Cyan 2 DAC

The Holo Audio Cyan 2 is a compact, fully discrete R2R digital-to-analogue converter designed around separate conversion architectures for PCM and DSD. The PCM signal is handled by a discrete R2R resistor network, while DSD is converted using a dedicated vector step resistor network, allowing the Cyan 2 to process both formats natively within its discrete conversion architecture.

The Cyan 2 incorporates Holo Audio’s new-generation de-glitch technology and a galvanically isolated USB interface. USB supports PCM up to 32-bit/1.536MHz, DSD64 through DSD1024 natively and DSD64 through DSD512 using DoP. Its I²S input provides the same 1.536MHz PCM and DSD1024 capability.

With both balanced XLR and single-ended RCA analogue outputs, Non-Oversampling (NOS) operation and automatic input selection, the Cyan 2 provides a highly capable digital front end in a compact 300mm-wide chassis.


Key Features

  • Fully discrete R2R DAC architecture
  • Dedicated vector step resistor network for DSD conversion
  • PCM and DSD decoding
  • Non-Oversampling (NOS) operation
  • New-generation de-glitch technology
  • Galvanically isolated USB input
  • PCM support up to 1.536MHz / 32-bit via USB and I²S
  • Native DSD support up to DSD1024
  • Balanced XLR and single-ended RCA outputs
  • Automatic input selection
  • Compact aluminium chassis
  • No buttons or remote control

DAC Architecture

DAC Type: Fully discrete resistor network / R2R

PCM Conversion: R2R resistor network

DSD Conversion: Vector step resistor network

Conversion Mode: NOS (Non-Oversampling)

De-Glitch Technology: New-generation full-amplitude de-glitch technology

Holo Audio states that the Cyan 2’s new-generation de-glitch technology provides full-amplitude de-glitching without increasing the noise floor or introducing the associated adverse effects described by the manufacturer.


Digital Inputs

Coaxial / Optical / AES:

  • PCM: 44.1–192kHz, 24-bit
  • DSD64 via DoP

USB – Galvanically Isolated:

  • PCM: 44.1kHz–1.536MHz, 32-bit
  • DSD64–DSD512 via DoP
  • DSD64–DSD1024 Native

I²S:

  • PCM: 44.1kHz–1.536MHz, 32-bit
  • DSD64–DSD1024

The Cyan 2’s USB interface uses proprietary firmware and is designed for high-reliability, low-latency data transmission.


Analogue Outputs

Balanced Output: XLR

Single-Ended Output: RCA

PCM 48kHz NOS:

  • THD+N: 0.0005% @ 1kHz (-106dB)
  • DNR: -127dB
  • Output Level: 2.5Vrms RCA / 5.0Vrms XLR

DSD128:

  • THD+N: 0.0002% @ 1kHz (-114dB)
  • DNR: -115dB
  • Output Level: 1.25Vrms RCA / 2.5Vrms XLR

Output Impedance:

  • RCA single-ended: 20Ω
  • XLR balanced: 40Ω

Input Selection & Operation

The Cyan 2 incorporates automatic input selection, with LED indicators identifying the active input and sample-rate type.

The unit does not incorporate front-panel control buttons or a remote control.


Construction

The Cyan 2 is housed in a compact chassis measuring 300 × 200 × 48mm. The documentation specifies these dimensions for the chassis itself and notes that protruding parts are not included.

Chassis Dimensions: 300 × 200 × 48mm
Dimensions: 11.8 × 7.9 × 1.9in

Weight: 3.5kg / 7.72lbs


Power

Power Consumption: 20W

Configurable Mains Input:

  • 220–230V, 50/60Hz
  • 110–115V, 50/60Hz

Fuse – 220–230V: 2A SB 5 × 20mm

Fuse – 110–115V: 4A SB 5 × 20mm

The required mains configuration is determined by the specification label on the underside of the unit.


Included Accessories

  • AC power cable
  • USB cable

Conclusion

The Holo Audio Cyan 2 brings genuinely sophisticated digital conversion technology into a remarkably compact chassis. Its fully discrete R2R architecture, dedicated vector step resistor network for DSD and Non-Oversampling operation provide a distinctive technical foundation, while the new-generation de-glitch technology is designed to maintain full-amplitude conversion without increasing the noise floor.

Its extensive digital compatibility is equally impressive, with USB and I²S supporting PCM up to 1.536MHz and native DSD up to DSD1024, alongside conventional AES, coaxial and optical inputs. Balanced XLR and single-ended RCA outputs provide straightforward integration into both high-end balanced systems and conventional stereo configurations.

For listeners seeking a compact reference-quality DAC built around discrete conversion rather than an integrated converter chipset, the Cyan 2 offers an unusually comprehensive combination of R2R PCM conversion, dedicated DSD processing, high-resolution digital support and straightforward analogue connectivity.

*The information provided above has been taken from the manufacturer’s original product manual and is intended as a reference. Specifications, features, dimensions and other details may vary depending on production version, regional configuration or subsequent manufacturer revisions. Please confirm specific details with HFX Systems prior to purchase.

Dependant on stock availability
Enquire

All products imported from HFX Systems are subject to the buyer's responsibility for importing taxes and duties, as well as electrical compliance in the buyer’s respective country. HFX Systems does not assume any responsibility for these matters, and it is the buyer's sole responsibility to ensure compliance with all relevant regulations.